Line 6 Catalyst CX 200 Guitar Amplifier

Catalyst CX 200 is a 200 watt dual-channel 2x12 combo amplifier that performs like a traditional guitar amp - while providing the increased versatility of a modern amp. It offers 12 Amp Voicings - ranging from pristine clean to modern high-gain - plus 24 Effects, all derived from the Helix amp and effects processor.

The Catalyst family includes three dual-channel amplifiers that perform like traditional guitar amps - while providing the increased versatility of modern amplifiers. From the 200-watt Catalyst 200, capable of holding its own on nearly any stage, to the 60-watt Catalyst 60, which is perfect for practice, recording, and performing in small venues - there's a Catalyst amp for every player. Catalyst amplifiers offer six Original Amp Designs - ranging from pristine clean to modern high-gain - crafted using our renowned HX sound design techniques to ensure exceptional tone and feel. These powerful and sturdily constructed combos are equally suited for stage or studio use, and feature an XLR line output and a 4-channel USB recording interface. Also included are Boost circuits customized for each amp type, a dedicated Reverb section with six reverb types, 18 additional effects, an effects loop, a Power Amp input for using Catalyst as a powered speaker, MIDI capabilities, and power attenuation options for playing at any volume. The free Catalyst Edit app for desktop and mobile devices provides deep editing capabilities. Add an optional LFS2 footswitch for even more flexibility, and an optional cover to protect your combo.

Traditional Controls & More: At the heart of Catalyst amps are a familiar set of volume, gain, tone, and reverb controls while just "under the hood" are numerous effect and other options.

Pro Connectivity: Provides a professional connection to PA and recording systems. Includes a Ground Lift switch.

Dedicated Boost: Each amp features a custom Boost. Adjust the boost amount and switch the boost on/off using the dedicated Boost knob and button.

18 Additional Effects: Choose from six types of Modulation, Delay, and Pitch effects - all drawn from the celebrated HX and Legacy effects libraries.

Effects Loop: Insert external effects and other devices into your signal chain using the Effects Loop.

Output Power: Provides half power, 0.5 watt, and speaker Mute options for reduced volume with minimal tone variation.

Power Amp In: Use Catalyst as a powered speaker by bypassing the preamp. Perfect for use with amp modelers and simulators.

USB: Use this connect to the Catalyst Edit app and to the onboard audio interface, which provides 4 channels (4in/4out) at 24-bit, 44.1/48.1 kHz. 

MIDI: Catalyst 100 and 200 receive Program Change (channel/preset selection) and Continuous Controller messages via 5-pin DIN. Catalyst 60 supports MIDI over USB-B.

Footswitch: The 2-button LFS2 is a roadworthy metal latching footswitch that provides remote control of Channel and Effect on/off status. The Effect switch may be reassigned via the Catalyst Edit app. A ten-foot right-angle/straight TRS cable is included.

Features: 

• 3 Dual-channel combos from 200 to 60 watts
• 12 Amp Voicing derived from the Helix processors
• Dedicated Boost circuit with boost types optimized for each amp
• 24 Effects Derived from Helix processors 
• Tap Tempo/Tuner button
• XLR line output for pro connection to P.A. or recording devices
• Effects loop and Power Amp input for integrating external devices
• 2-channel audio interface, MIDI, and Mac®/iOS®/PC/AndroidTM connectivity via USB
• MIDI In via DIN connector on Catalyst CX 200 and Catalyst CX 100
• Free Catalyst Edit app for desktop and mobile devices

Specifications: 

• Amplifier Wattage: 200 watts RMS
• Output Power Damping: 100W, 0.5W, mute/recording
• Speakers: 2 x 12" Custom design
• Amp Voicings: 12
• Number of Channels: 2
• Banks: 6
• Controls: EQ, Boost, Gain, Volume, Ch. Volume, Effect level, Reverb level, Master
• EQ: 3 Band + Presence
• Boost: Customized for each amp; switchable
• Delay: 6
• Modulation: 6
• Pitch/Filter:  6
• Reverb: 6
• Tap Tempo/Tuner: Button
• Effects Loop: 1/4" Input & Output
• Power Amp In: 1/4"
• Aux In: 3.5 mm Stereo 
• Stereo Headphone Out: 1/4"
• USB: Type B
• Direct Out: XLR with ground lift
• Analog Footswitch Functions: Channel Select, Effect on/off
• MIDI DIN: In