Yamaha LLTS BS Acoustic Guitar

Yamaha LL-TA TransAcoustic guitars transport you to new creative spaces with immersive reverb and lush chorus effects, without needing an amp of other external gear. Great for recreational guitarists, the LL-TA has an A.R.E. treated solid Engelmann spruce top with rosewood back and sides. Modified non-scalloped bracing retains the L-series' characteristic bright tone while enhancing the low end. 

Acoustic Guitar (R)Evolution

Playing guitar in a great sounding room is the most inspiring, engaging playing experience imaginable- far more enjoyable than in a dry-sounding room like a lounge, office or den. Yamaha's TransAcoustic Guitar recreates the incredible experience of playing in a rich, live room without needing any external amplification or effects- just the guitar itself. Whether you're practicing, writing, recording or just playing for fun, the TransAcoustic Guitar will make you play better, longer and with more creativity. Once you've experience it, you'll never want to play another acoustic guitar again.

Actuator

An actuator installed on the inner surface of the guitar back resonates in response to the vibrations of the strings. The vibrations generated by the actuator are then transmitted to the body of the guitar and to the air in and around it, resulting in authentic reverb and chorus sounds that actually radiate from within the body.

Simple Controls

Three simple controls adjust the effects levels and line out volume level. The small knobs occupy less space, reducing the acoustic sound loss that results from removing body wood

(A) Chorus Control

(B) Reverb Control (Room/Hall)

(C) TA Switch/ Line Out Volume Control

*Pressing the TA Switch for longer than 0.3 seconds activates the TA function

*When a cable is connected to the Line Out jack, the volume can be adjusted by rotating knob (C).

Battery Box

The battery box is integrated into the end-pin jack, requiring fewer holes in the body and thus reducing acoustic sound loss. Connect a cable from the jack to a PA or amp to use the TA instrument as an acoustic-electric guitar.

• Traditional western body design
• Solid Engelmann spruce top with A.R.E. treatment
• Solid rosewood back & sides
• Amazing sounding reverb/chorus built-into the guitar with no need for external amplification or effects
• Designed to provide superb acoustic guitar sound
• Built-in reverb and chorus effects- no need for an amp or other external gear